The ars-imago IMAGO 320 is a black and white film. It is offered by the photo retailer ars-imago from Switzerland under its own brand.
The material for the film was not produced exclusively for ars-imago. According to the supplier, however, the emulsion is not currently available on the market from other suppliers.
The film is best exposed at ISO 320, which is said to produce a fine grain and good detail.
The panchromatic black-and-white film is developed in a black-and-white developer. The usual developers can be used for this purpose.
The Limited Edition is available as 35mm film with 36 frames and as 120 medium format film. The film is cast on an acetate-based carrier. Thereby the 35mm film has a thickness of 120 micrometers and the medium format film a thickness of 100 micrometers.
Development times
Development times for the ars-imago IMAGO 320
Developer | Dilution | Developer / Water | ISO | Time | Temperature |
---|---|---|---|---|---|
Caffenol | Stock | 320 | 10 min | 20°C / 68°F | |
D-76 | Stock | 320 | 6:30 min | 20°C / 68°F | |
D-76 | 1+1 | 320 | 12 min | 20°C / 68°F | |
ID-11 | Stock | 320 | 7 min | 20°C / 68°F | |
ID-11 | 1+1 | 320 | 11:30 min | 20°C / 68°F | |
Kodak HC-110 | B (1+31) | 320 | 5:30 min | 20°C / 68°F | |
Rodinal | 1+25 | 320 | 7:30 min | 20°C / 68°F | |
Rodinal | 1+50 | 320 | 13 min | 20°C / 68°F | |
XTOL | Stock | 320 | 8 min | 20°C / 68°F | |
Xtol | 1+1 | 320 | 10 min | 20°C / 68°F |
Calculation of the development solution
How much development solution do you need?
Technical datasheet
Attribute | Specification |
---|---|
35mm Format | Yes |
Base material thickness (35mm) | 120 µm |
Medium format / roll film | Yes |
Base material thickness (medium format) | 100 µm |