The Haking Vision Mini Matic is a classic compact camera from the 1990s. It was mostly used by "amateurs" and was popular for family celebrations or vacations. It was produced by the Hong Kong company Haking. However, the production took place in Thailand. "German Patent P42 30 042 . 8 AND Patents Worldwide" is printed on the underside of the camera.
Camera features
The Haking Vision Mini Matic features a fixed 35mm lens that offers an estimated focal length ranging from 28mm to 35mm. The integrated autofocus system makes focusing easier. A sliding door is present to protect the lens from potential damage and dirt.
The camera is also equipped with an internal exposure metering system. The built-in sensor in the film cartridge automatically adjusts aperture and exposure time, eliminating the need for manual adjustments.
There is also a built-in flash, complemented by a special "red-eye" minimization mode. Additional features include the ability to activate a self-timer and a tripod mount.
The camera uses CR123A batteries (eBay / Amazon*) for power supply. This type of battery is still available today. You can get this type of battery cheap online.
Film variants for the Haking Vision Mini Matic
According to the operating instructions, the Haking Vision Mini Matic takes standard 35mm films. These types of film are available from numerous suppliers and can be processed without any problems.
Recommended films for this compact camera include Kodak Gold 200* for color images and Ilford Delta 400* for black and white Recordings. Other suitable films are available from suppliers such as Lomography, Fujifilm, Rollei, Adox and Foma.
The negatives of the Haking Vision Mini Matic measure 24mm x 36mm. An automatic system allows the film to advance after each exposure, while a counter on the top shows the number of exposures already taken. On the back there is a small window through which you can find the inserted film.
When the film is finished, it is automatically rewound into its cassette. This can also be forced by a switch on the bottom. Before removing the film for processing, make sure it is fully rewound to avoid damage from exposure to light.
