The Fujifilm Simple Ace is a disposable camera. It is sold on the Japanese market by Fujifilm.
The camera is made of plastic and comes with a fixed lens. The focal length is fixed and is 32 mm. The largest available aperture is f/10. The focus of the lens is fixed. The closest focusing distance is 100 cm with this lens.
The aperture and shutter speed cannot be used. The shutter speed value is 1/140 second. There is a built-in flash for taking pictures in low light conditions, especially indoors. The range of the flash is 1.2 metres - 3 metres.
With a size of 12.8 x 6.8 x 3.3 cm, the Fujifilm Simple Ace weighs 90 grams according to the instruction manual. The batteries for powering the flash are permanently installed in the camera. So if the batteries run out, perhaps because they have been stored too long, you can still use the camera.
Films for the Fujifilm Simple Ace
35mm film is exposed in the Fujifilm Simple Ace. The film material was produced by Fujifilm and is already inserted. It is an ISO 400 colour film. The film is universal and gives solid results. It is well suited for parties or weddings. It is also a good companion on holiday.
The exposure area of the Fujifilm Simple Ace is 24 mm x 36 mm. This means that 27 photos can be taken with the camera.
How to get a disposable camera developed
Find a lab: Start by finding a photo lab that offers disposable camera development. Many local labs and larger chains offer this service.
Check the camera: Before taking the camera to the lab, it should have been fully used. Read the camera's instruction manual to make sure the camera has been used properly.
Take the camera to the lab: Take the disposable camera to the lab and have it developed. Depending on the lab, you may be able to drop off the camera and pick up the developed photos shortly afterwards, or you may have to wait a few days for the photos to be developed. The lab usually provides prints or digital scans of the photos, and you have the option to buy additional prints or products.
Wait for the results: Depending on the lab's turnaround time, you can wait anywhere from a few hours to several days for the developed photos to be ready for pickup.
That's it. Developing a disposable camera is a straightforward process, but it is important that the camera has been fully used before bringing it to the lab. Be sure to follow the lab's instructions and let them know your special requests.
